- Capacity: 4200 L
- Inlet Height: 1.28 m
- Diameter: 2.15 m
- Total Height: 1.37
- State Available: QLD, SA, VIC
Note – The colours shown on screen represent the actual colour as accurately as possible however they will vary depending on web browser, screen and printer type.
With Poly Tanks and Poly Products capacities and measurements are tested in accordance with AS4766, but may vary due to the roto-moulding process. Dimensions in metres are rounded to the nearest centimetre.
Subtract 100mm from pump cover dimensions when estimating internal measurements.
When estimating space requirements for siting your tank, Bushmans recommends a minimum clearance of 100mm at top and sides for Poly Tanks and 1m for Aqualine Tanks. Read less
Note – The colours shown on screen represent the actual colour as accurately as possible…..Read more
4,200 Litre Squat Rainwater Tank
Bushmans expert design team have introduced this 4,200 Litre tank. It is designed specifically for sites that require a low water inlet heights.
It is made from polyethylene (poly) which is a non-corrosive tank material designed for long life. Poly tanks are usually constructed as one single piece. This means that there are no joints or seams on the tank itself. Bushmans Poly tanks have many benefits;
- they will not rust or suffer from corrosion
- they are lightweight and easy to handle
- they are constructed as one single piece which means that there are no joints or seams on the tank itself
- they are only manufactured using materials that comply with the AS/NZS4766 standards which inhibits the growth of algae, and
- they can be recycled at the end of their life.
If you would like to know more information about this rainwater tank, or about any of our products, please enquire now.