5 Tap Rainsaver 50L/Min Hydraulic Changeover Unit

The Bianco RS6-INOX45S2MPCX Rainsaver unit is a change over system that allows the automatic change between mains water and tank water without having to manually switch with a tap. The RS6 Rainsaver unit is a mechanical unit requiring no electrical fittings on float systems. The RS6 has a maximum flow of 58 litres per minute.

Having a tank mains system changeover unit makes the management of the tank and mains water straight forward. This is a simple and easy unit and the reliability of the RS6 unit makes it an easy choice. The RS6 unit is water marked and approved for connection to mains water. A key feature of this unit is the backflow system which prevents any mixing of mains water and tank water. The water supply authorities have this feature as key criteria for the approval of any water change over unit.

The RS6-INOX45S2MPCX comes with a 5 tap pump which provides secure and reliable water and is used in houses and buildings where the desire is for a simpler and cost effective change over unit is required.

The RS6-INOX45S2MPCX is used around smaller houses or garden applications.

The RAINSAVERMK6 is an Automatic Rainwater / Mains Water Changeover Device designed to provide automatic mains back up for Pressure Pump supply systems. The RAINSAVERMK6 is designed to be installed in conjunction with a Pressure Pump supply system that is fitted with an independent pressure and flow controller with loss of prime protection and 24 hour auto restart.

Specifications – BIA-INOXG60MPCX
The pump is a self-priming pressure system pump supplied wired and ready to install. The self-priming ability provides excellent suction capacity. Used especially for supplying water to domestic installations.

The pump is characterised by:

• Automatic electronic pump control fitted and wired.
• Automatic electronic control provides run dry protection and constant pressure at low flows. Automatic electronic control has in-built check valve & auto restart.
• Corrosion resistant pump body, diffuser and impeller.
• Mechanical shaft seal.
• 240V single phase TEFC motor with in-built auto reset thermal overload.

Operation

The RAINSAVERMK6 supplies clean rainwater from a rainwater tank via an automatic pressure system pump to toilets, laundry and garden taps in a household. Mains water is also connected to the RAINSAVERMK6 as an automatic back up should rain water level be too low, or if there is a power or pump failure.