- Max Lift: 3m m
- Max Flow: 55 L/Min m
- Nominal Pressure: 150LPa
- State Available: ACT, NSW, NT, QLD, SA, VIC
Note – The colours shown on screen represent the actual colour as accurately as possible however they will vary depending on web browser, screen and printer type.
With Poly Tanks and Poly Products capacities and measurements are tested in accordance with AS4766, but may vary due to the roto-moulding process. Dimensions in metres are rounded to the nearest centimetre.
Subtract 100mm from pump cover dimensions when estimating internal measurements.
When estimating space requirements for siting your tank, Bushmans recommends a minimum clearance of 100mm at top and sides for Poly Tanks and 1m for Aqualine Tanks. Read less
Note – The colours shown on screen represent the actual colour as accurately as possible…..Read more
BIA-TECHG60MPCX Pressure Pump
4-5 Tap Pump Bianco BIA-TECHG60MPCX is a small 5 tap pump which can be used around the house, farm or hobby farm. The TechG60 comes with a 0.45kw electric motor, it has a top head of 45 metres, a maximum flow rate of 55 litres per minute and has 25mm inlet and a 25mm outlet. The pressure controller is 1.5 bar.
This is a simple, low cost pump which is often used to augment water supply by boosting domestic systems and it is ideally located next to the tank. To maintain pressure in the system the 1.5 bar pressure controller provides constant pressure by switching the pump on and off each time a tap is turned on and off. If the tank runs dry the pump will automatically turn off protecting the pump.
The TECHG60 water pumps are used where only small flows of water are required, which is often around the garden or for smaller water troughs.
When the TECHG60 is installed a pump cover should be used to protect the pump or alternately the pump should be located indoors.