- Max Flow: 55 L/Min m
- Max Lift: 6 m m
- Nominal Pressure: 370 KPa
- State Available: ACT, NSW, NT, QLD, SA, VIC
Note – The colours shown on screen represent the actual colour as accurately as possible however they will vary depending on web browser, screen and printer type.
With Poly Tanks and Poly Products capacities and measurements are tested in accordance with AS4766, but may vary due to the roto-moulding process. Dimensions in metres are rounded to the nearest centimetre.
Subtract 100mm from pump cover dimensions when estimating internal measurements.
When estimating space requirements for siting your tank, Bushmans recommends a minimum clearance of 100mm at top and sides for Poly Tanks and 1m for Aqualine Tanks. Read less
Note – The colours shown on screen represent the actual colour as accurately as possible…..Read more
Rainsaver Electric Change over Unit
The RS4e-InoxG60MPCX Rainsaver is an automatic change over device. This is an electrical unit and is idea when a large water flow with higher pressure is required. The Rainsaver unit allows the house water system to change between the mains water and tank water seamlessly when the tank empties or fills. You never run out of water. One of the benefits of the Mk4 unit is the backflow prevention valve which prevents any tank water mixing with mains water. This is important to the various water utilities.
The unit is water marked and approved for all town water connections.
The Mark 4 Rainsaver has been in the field for many years dependable and reliable service.
The RS4e-InoxG60MPCX Rainsaver unit includes a 5 tap pump which is ideal for applications where there is a need for additional water around the house or yard. The pump provides a reliable pressure along with a good flow rate.
The RS4e-InoxG60MPCX is commonly used in larger households where there is a need for larger flows and pressures.