- Max Flow: 55 L/Min m
- Max Lift: 3 m m
- Nominal Pressure: 150 LPa
- State Available: ACT, NSW, NT, QLD, SA, VIC
Note – The colours shown on screen represent the actual colour as accurately as possible however they will vary depending on web browser, screen and printer type.
With Poly Tanks and Poly Products capacities and measurements are tested in accordance with AS4766, but may vary due to the roto-moulding process. Dimensions in metres are rounded to the nearest centimetre.
Subtract 100mm from pump cover dimensions when estimating internal measurements.
When estimating space requirements for siting your tank, Bushmans recommends a minimum clearance of 100mm at top and sides for Poly Tanks and 1m for Aqualine Tanks. Read less
Note – The colours shown on screen represent the actual colour as accurately as possible…..Read more
Bianco 5 Tap Pressure System Pump
The most popular small pump is the Bianco BIA-INOX60PC20 which provides water to 5 taps and is ideal for applications where there is a need for additional water around the house or yard. The Tech60PC comes with a 0.33kw or 0.5HP motor and can push up a maximum head of 32 metres, with a flow rate of 55 Litres per minute. The pump has a pressure controller with the inlet and outlets are 25mm.
The INOXG60 pump is used around sheds and other situations where there is a need for good pressure across up to 5 taps. With the up to 55 litres per minute flow rate, this pump can be used to fill buckets and other vessels quickly. Ideally located next to the tank with a flood inlet for maximum pressure and flow.
When a tap is turned on the pump starts ensuring there is an even pressure at all times. This is achieved through the Bianco pressure controller system and if the pump runs out of water it will automatically switch off.
To get the maximum life from the pump it should be housed inside a pump cover or inside a building.