• Max Flow: 57 L/Min m
  • Max Lift: 6 m m
  • Nominal Pressure: 150 KPa
  • State Available: ACT, NSW, NT, QLD, SA, VIC

Note – The colours shown on screen represent the actual colour as accurately as possible however they will vary depending on web browser, screen and printer type.

With Poly Tanks and Poly Products capacities and measurements are tested in accordance with AS4766, but may vary due to the roto-moulding process. Dimensions in metres are rounded to the nearest centimetre.

Subtract 100mm from pump cover dimensions when estimating internal measurements.

When estimating space requirements for siting your tank, Bushmans recommends a minimum clearance of 100mm at top and sides for Poly Tanks and 1m for Aqualine Tanks. Read less

Note – The colours shown on screen represent the actual colour as accurately as possible…..Read more

Item code: BIA-INOX60s2MPCX

Stainless Steel Pressure System Pump

Where more water is required the BIA-INOX60s has stainless steel pump housing and provides water for up to 5 taps and a flow rate of 50 litres per minute. This pump has a 0.6kw or 0.8 HP motor and can pump to a highest head of 50 metres. It has 25mm BSPF inlet and a 25mm BSPM outlet port and a pressure controller.

The Banco INOX60s is a quiet pump and can provide water around the farm yard, shearing shed, cattle yards or the house yard. Ideally the pump should be located next to the tank where the flooded inlet will allow the maximum volume and pressure to be achieved.

In the case of the pump running dry, it turns off and the 1.5 bar controller switches the water pump on when a tap is turned on. This feature provides constant pressure whenever water is required.

Widely used for washing down equipment, for garden sprinklers and for water troughs the BIAINOX60s is a versatile pump.

Protecting the water pump from the elements is important for longer life and for this reason a pump cover should be used for shelter.

You may also like…