BIA-BHM5-4MPCX Pressure System Pump
BHM5-4MPCX-Pressure-Pump
  • Max Flow: 105 L/Min m
  • Max Lift: 6 m m
  • Nominal Pressure: 150 LPa
  • State Available: ACT, NSW, NT, QLD, SA, VIC

Note – The colours shown on screen represent the actual colour as accurately as possible however they will vary depending on web browser, screen and printer type.

With Poly Tanks and Poly Products capacities and measurements are tested in accordance with AS4766, but may vary due to the roto-moulding process. Dimensions in metres are rounded to the nearest centimetre.

Subtract 100mm from pump cover dimensions when estimating internal measurements.

When estimating space requirements for siting your tank, Bushmans recommends a minimum clearance of 100mm at top and sides for Poly Tanks and 1m for Aqualine Tanks. Read less

Note – The colours shown on screen represent the actual colour as accurately as possible…..Read more

Item code: BIA-BHM5-4MPCX

10 Tap Pressure System Pump

The BIA-BHM5-4MPCX is a 10 tap pump that is suitable for medium to large homes and other urban applications. The pump comes with a 240 volt 0.6kw motor, with a maximum head of 36 metres and maximum flow of 105 litres per minute. The pump comes with a 25mm BSPF inlet and BSPM outlet and a controller.

The pump is quiet and provides reliable water from tanks located next to the house or from sheds and other buildings that are located away from the house. The pressure controller starts the pump every time a tap is turned on which ensures there is constant pressure maintained whilst the water is delivered. There is a dry run protection switch which will turn the pump off automatically if there is no water available to pump.

The applications of the pump can be for household use, use around the garden, washing outdoor areas or for activities around the shed. The placement of the water pump is important as the pump needs to be protected from the outside weather conditions by either placing the pump indoors or installing it in a pump cover.

You may also like…