10,000 Litre Molasses Tank
  • Capacity: 10000 L
  • Inlet Height: 2.24 m
  • Diameter: 2.57 m
  • Total Height: 2.44
  • State Available: NSW

Available Colours

Note – The colours shown on screen represent the actual colour as accurately as possible however they will vary depending on web browser, screen and printer type.

With Poly Tanks and Poly Products capacities and measurements are tested in accordance with AS4766, but may vary due to the roto-moulding process. Dimensions in metres are rounded to the nearest centimetre.

Subtract 100mm from pump cover dimensions when estimating internal measurements.

When estimating space requirements for siting your tank, Bushmans recommends a minimum clearance of 100mm at top and sides for Poly Tanks and 1m for Aqualine Tanks. Read less

Note – The colours shown on screen represent the actual colour as accurately as possible…..Read more

Item code: TXDM2300

10,000 Litre Molasses Tank

The Bushmans’ TXD2300 tank is a domed 10,000 litre tank, purpose built for holding molasses on farm. It is optimal for storage and also for dispensing the molasses used in feeding cattle when the feed available is dry. Feeding molasses to cattle allows for the better utilisation of dry feed.

This tank is particularly prevalent in areas which are relatively close to sugar mills. Molasses are a perfect energy supplement and can be used to feed to ruminant animals such as cattle. Molasses have high palatability, provide energy at a low cost, and offer flexibility and simplicity in regards to storing and distribution. Molasses are a very good dry feed supplement.

One of the key features of molasses is that it can be used on its own or mixed with other supplements, for example urea and protein meal, resulting in improvement of protein and energy deficiencies. If you need your stock to be sturdier in dry times than molasses is perfect.

Bushmans’ molasses products are not only strong but they are fortified with specialised fittings that last and work well in metering out product on farm. Bushmans’ have many years of experience in making molasses thanks and their products have stood the test of time in the field.

The engineering of Bushmans’ Molasses tanks translate to a purpose built tank with the heavier weight of molasses in mind. The walls of the tank is denser and are therefore able to hold molasses heavier weight. The tanks can be delivered to farm and are ready to use as the 3’ outlet and vented lid will be installed. For more information on Bushmans’ Molasses tanks call 1800 287 462 or visit your local Bushmans’ office or stockist.