• Height: 2.3 m
  • Inlet Height: 2.35 m
  • Diameter: 7.22 m
  • State Available: ACT, NSW, QLD

Available Colours

Note – The colours shown on screen represent the actual colour as accurately as possible however they will vary depending on web browser, screen and printer type.

With Poly Tanks and Poly Products capacities and measurements are tested in accordance with AS4766, but may vary due to the roto-moulding process. Dimensions in metres are rounded to the nearest centimetre.

Subtract 100mm from pump cover dimensions when estimating internal measurements.

When estimating space requirements for siting your tank, Bushmans recommends a minimum clearance of 100mm at top and sides for Poly Tanks and 1m for Aqualine Tanks. Read less

Note – The colours shown on screen represent the actual colour as accurately as possible…..Read more

Item code: ASL90

90,000 Litre Aqualine Steel Liner Tank

The ASL90 is made from galvanised iron and steel which is one of Australia’s iconic Australian building materials that has stood the test of time and become part of our heritage. This tank holds 90,000 litres of water and is used extensively on farms and properties throughout regional Australia as well as being installed in a wide range of commercial applications such as storm water retention and detention.

The galvanised walls, roof and roof trusses provide a strong frame for the tank and the polyethylene liner holds the water. The Australian weather conditions are extreme and this tank is designed and built to match these conditions.

Suited for the storage of drinking water the ASL90 meets the AS/NZS4020 potable water standard.

With a galvanised external ladder, Geotextile liner protection, lockable access manhole, inlet strainer, 100mm Gal overflow, 50mm outlet and ball valve, this tank once installed is ready to hold water.

The ASL90 is not only available in gal but also a range of Colourbond colours.

All our modular tanks are transported and assembled on site by our Aqualine installation team, across eastern and central Australia. When complete all you need to do is connect it to a roof for rain harvesting or to a water source such as a bore and you are ready to go.

All our modular tanks are transported and assembled on site by our Aqualine installation team, across eastern and central Australia. When complete all you need to do is connect it to a roof for rain harvesting or to a water source such as a bore and you are ready to go.

 

You may also like…