- Capacity: 363000 L
- Inlet Height: 2.35 m
- Diameter: 14.40 m
- Height: 2.3 m
- State Available: ACT, NSW, QLD
Note – The colours shown on screen represent the actual colour as accurately as possible however they will vary depending on web browser, screen and printer type.
With Poly Tanks and Poly Products capacities and measurements are tested in accordance with AS4766, but may vary due to the roto-moulding process. Dimensions in metres are rounded to the nearest centimetre.
Subtract 100mm from pump cover dimensions when estimating internal measurements.
When estimating space requirements for siting your tank, Bushmans recommends a minimum clearance of 100mm at top and sides for Poly Tanks and 1m for Aqualine Tanks. Read less
Note – The colours shown on screen represent the actual colour as accurately as possible…..Read more
363,000 Litre Aqualine Steel Liner Tank
The ASL363 is Aqualine’s largest water tank holding 363,000 litres of water. This tank is typically installed where there is a need for big volumes of water to be stored and managed. Normally these tanks are in locations such as mines, water treatment plants, industrial processing and for storm water management.
The roof and walls all are made from corrugated galvanised iron and incorporating Hot dipped roof trusses they have a high level of rust protection. The corrugated walls fit in the Australia landscape with the water tank sitting alongside corrugated sheds and buildings. There is no need for the replacement of a sacrificial anode as is the case for tanks made from Zincalume®. With a tough polyethylene liner the tank is designed to hold water for years.
Being made in a professional environment with skilled operators ensures the ASL363 is a high quality product.
The water stored in the tank can be used for a wide range of applications including drinking water as the liner is made to the AS/NZS4020 potable water standard.
The finished tank is equipped with a galvanised ladder, a geotex wall liner protection sheet, lockable manhole, inlet strainer, 100mm steel overflow, 50mm outlet and ball valve resulting in a tank that is ready for use.
The walls and roof can be made from steel with Colourbond colours.
The ASL363is a modular tank that is transported and constructed on site . Build your tank pad with sand or crusher dust and installation can be done quickly.