• State Available: ACT, NSW, QLD, SA, VIC

Note – The colours shown on screen represent the actual colour as accurately as possible however they will vary depending on web browser, screen and printer type.

With Poly Tanks and Poly Products capacities and measurements are tested in accordance with AS4766, but may vary due to the roto-moulding process. Dimensions in metres are rounded to the nearest centimetre.

Subtract 100mm from pump cover dimensions when estimating internal measurements.

When estimating space requirements for siting your tank, Bushmans recommends a minimum clearance of 100mm at top and sides for Poly Tanks and 1m for Aqualine Tanks. Read less

Note – The colours shown on screen represent the actual colour as accurately as possible…..Read more

Item code: WDIG01

In Ground First Flush Diverter Kit

The in-ground first flush diverter is ideal for sloping blocks and the diverter is buried and out of sight. When set-up the end cap of the diverter can be placed above the ground for draining and maintenance. The In-Ground Diverter can operate as a wet system and it can be converted into a dry system.

Most diverters are set-up as a wet system due to the size of buildings and the location of tanks often separate from buildings. This is a result of long runs of pipe underground leading to a riser at the tank. A dry system can improve water quality.

Features and Benefits

  • Prevents sediment, bird droppings, spiders, insects, mosquito eggs and debris from entering the water tank.
  • Improves water quality therefore protecting pumps and internal equipment.
  • No mechanical parts.
  • Inlet fits 75mm Schedule 40 pipe or 90mm Schedule 40 female coupling.
  • Easy installation – just add pipe and glue.
  • Low maintenance.