50mm Flex Hose Kit
  • State Available: ACT, NSW, QLD, SA, VIC

Note – The colours shown on screen represent the actual colour as accurately as possible however they will vary depending on web browser, screen and printer type.

With Poly Tanks and Poly Products capacities and measurements are tested in accordance with AS4766, but may vary due to the roto-moulding process. Dimensions in metres are rounded to the nearest centimetre.

Subtract 100mm from pump cover dimensions when estimating internal measurements.

When estimating space requirements for siting your tank, Bushmans recommends a minimum clearance of 100mm at top and sides for Poly Tanks and 1m for Aqualine Tanks. Read less

Note – The colours shown on screen represent the actual colour as accurately as possible…..Read more

Item code: FLEX50KIT

50mm Flex Hose Kit

A 50mm flexible hose kit is essential in almost all poly tank installations. It is made provide flex between the tank and any fittings that the tank is connected to. If the tank is connected directly to hard fitted fittings, there is a high risk of tank or pipe damage due to the movement of the tank as it fills and empties or the pipework moving due to soil movement. If a poly water tank is not fitted with a flexible hose connection, then the tank warranty will be voided.

The flexible hose kits simple to install. They also enable additional flexibility when it comes to the locating the pump or other pipe work near the tank.