- State Available: ACT, NSW, QLD, SA, VIC
Note – The colours shown on screen represent the actual colour as accurately as possible however they will vary depending on web browser, screen and printer type.
With Poly Tanks and Poly Products capacities and measurements are tested in accordance with AS4766, but may vary due to the roto-moulding process. Dimensions in metres are rounded to the nearest centimetre.
Subtract 100mm from pump cover dimensions when estimating internal measurements.
When estimating space requirements for siting your tank, Bushmans recommends a minimum clearance of 100mm at top and sides for Poly Tanks and 1m for Aqualine Tanks. Read less
Note – The colours shown on screen represent the actual colour as accurately as possible…..Read more
Rainharvesting 150mm 1st Flush Diverter
With your rain harvesting system a first flush diverter can help improve water quality along with reducing tank maintenance and protecting pumps and household appliances by having clean water. This is done by the first flush of water, which can contain contaminants such as dirt and debris from the roof, from entering the tank. This diverter uses a dependable ball and seat system to flush the water and has no mechanical parts. The kit is all inclusive, just add pipe length and glue.
- Prevents first flush of water from the roof, from entering the tank
- Uses a dependable ball and seat system